hammer

VOGT.png

Premium Quality made in Germany

hammer_ani.jpg

Robust
chisel holder

Ergonomic
operating body

Integrated pressure
relief valve

Exchangeable
POM-handle

Vibration damping

Retractable
engaging lever

Strong

piston

Metal bend
protection spring

Pneumatic hammers have been around long. However VOGT Hammer are totally different: the lightweighted, lance-like design offers ideal working conditions. The practical robustness, the high quality of material and machining and low tool abrasion predestine for permanent use. A huge choice of tools and the possibility to adjust the device with different handle lengths open a multiplicity of application areas. Thus the VOGT Hammers are found in construction renovation businesses frequently.
VOGT Hammer VH 25 / VH 30 ‒ the light one
The smaller VOGT Hammer VH 25 / VH 30 has only half the weight of comparable electric hammers, which simplifies over-head-work. The VH 25-90 / VH 30-90 already reaches the complete storey hight without scaffold and planks. The higher impact frequency of the VH 25 / VH 30 is ideal for brittle materials: epoxy resin, plasters, filler, thin tiles, tile adhesive, residues of mortar and concrete. The small hammer mechanism is content with 190 litres per minute, which can even be provided by a single piston compressor.
VOGT Hammer VH 50 / VH 60 ‒ the strong one
The  VOGT Hammer VH 50 VH 60 is one size bigger: its stronger piston is appropriate for ductile, compact materials: bitumen, cement plaster and brickwork. Even extremely ductile parquet adhesives don’t resist the strong hammer mechanism. With its 18 mm tool strong leverage force can be applied during undermining works or when flat roof seals are broken up. However, if you want to use the tools of the VH 25 / VH 30, a 14 mm-hexagon is available for the VH 50 / VH 60.

vh25.jpg

VOGT Hammer VH25

the lightweight machine for all work on wall and ceiling

vh30.jpg

VOGT Hammer VH30

the low vibration machine for all work on wall and ceiling

vh50.jpg

VOGT Hammer VH50

the strong machine for all work on floor, roof and civil engineering

vh60.jpg

VOGT Hammer VH60

the low vibration machine for all work on floor, roof and civil engineering

Standard-handle

For all standard applications on floor, wall, ceiling and roof

standart-griff.jpg

Total length: 130 cm

130cm.jpg

Total length: 110 cm

110cm.jpg

Total length: 90 cm

90cm.jpg

Delta-handle

For strongly changing jobs like civil engineering, garden and landscaping

delta-griff.jpg

Total length: 70 cm

70cm.jpg

VOGT Hammer Tool Sets

Technical Specifications VH 25 / VH 30

GERÄT / MACHINE
VH 25-70
VH 30-70
VH 25-90
VH 30-90
VH 25-110
VH 30-110
VH 25-130
VH 30-130
VIBRATIONSGEDÄMPFT / VIBRATION DAMPED
Nein / No
Ja / Yes
Nein / No
Ja / Yes
Nein / No
Ja / Yes
Nein / No
Ja / Yes
LÄNGE / TOTAL LENGTH
70 cm (27,6“)
70 cm (27,6“)
90 cm (35,4“)
90 cm (35,4“)
110 cm (43,3“)
110 cm (43,3“)
130 cm (51,2“)
130 cm (51,2“)
GEWICHT STANDARD-GRIFF / WEIGHT STANDARD-HANDLE
3,2 kg (7,1 lb)
4,0 kg (8,8 lb)
3,5 kg (7,7 lb)
4,3 kg (9,5 lb)
3,8 kg (8,4 lb)
4,6 kg (10,1 lb)
4,1 kg (9,0 lb)
4,9 kg (10,8 lb)
GEWICHT DELTA-GRIFF / WEIGHT DELTA-HANDLE
4,2 kg (9,3 lb)
5,0 kg (11,0 lb)
4,5 kg (9,9 lb)
5,3 kg (11,7 lb)
4,8 kg (10,6 lb)
5,6 kg (12,3 lb)
5,1 kg (11,2 lb)
5,9 kg (13,0 lb)
SCHLAGZAHL MAX. / IMPACT RATE MAX.
3.200 /min
3.200 /min
3.200 /min
3.200 /min
3.200 /min
3.200 /min
3.200 /min
3.200 /min
BETRIEBSDRUCK / OPERATING PRESSURE
3,0 - 6,0 bar (44 - 87 psi)
3,0 - 6,0 bar (44 - 87 psi)
3,0 - 6,0 bar (44 - 87 psi)
3,0 - 6,0 bar (44 - 87 psi)
3,0 - 6,0 bar (44 - 87 psi)
3,0 - 6,0 bar (44 - 87 psi)
3,0 - 6,0 bar (44 - 87 psi)
3,0 - 6,0 bar (44 - 87 psi)
LUFTVERBRAUCH / AIR CONSUMPTION
190 l/min (6,7 cfm) / 6.0 bar (87 psi)
190 l/min (6,7 cfm) / 6.0 bar (87 psi)
190 l/min (6,7 cfm) / 6.0 bar (87 psi)
190 l/min (6,7 cfm) / 6.0 bar (87 psi)
190 l/min (6,7 cfm) / 6.0 bar (87 psi)
190 l/min (6,7 cfm) / 6.0 bar (87 psi)
190 l/min (6,7 cfm) / 6.0 bar (87 psi)
190 l/min (6,7 cfm) / 6.0 bar (87 psi)
Page 1 of 2

Technical Specifications VH 50 / VH 60

Renovators, painters, plasterers, tilers Sets

With tools for interior/exterior plaster and wall tiles

Extensive tooling for interior, exterior plaster and wall tiles

Floorer Sets

With the tools for flooring, floor tiles and parquet

Extensive tooling for flooring, floor tiles and elastically bonded parquet

Roofer Sets

With the tools for flat roof renovation

Extensive tooling for flat roof renovation

Civil engineering and road construction Sets

With the Digging spade for hand excavation works

Extensive tools for the civil engineering

GERÄT / MACHINE
VH 50-70
VH 60-70
VH 50-90
VH 60-90
VH 50-110
VH 60-110
VH 50-130
VH 60-130
VIBRATIONSGEDÄMPFT / VIBRATION DAMPED
Nein / No
Ja / Yes
Nein / No
Ja / Yes
Nein / No
Ja / Yes
Nein / No
Ja / Yes
LÄNGE / TOTAL LENGTH
70 cm (27,6“)
70 cm (27,6“)
90 cm (35,4“)
90 cm (35,4“)
110 cm (43,3“)
110 cm (43,3“)
130 cm (51,2“)
130 cm (51,2“)
GEWICHT STANDARD-GRIFF / WEIGHT STANDARD-HANDLE
4,4 kg (9,7 lb)
5,5 kg (12,1 lb)
4,8 kg (10,6 lb)
5,9 kg (13,0 lb)
5,2 kg (11,5 lb)
6,3 kg (13,9 lb)
5,6 kg (12,3 lb)
6,7 kg (14,8 lb)
GEWICHT DELTA-GRIFF / WEIGHT DELTA-HANDLE
5,4 kg (11,9 lb)
6,5 kg (14,3 lb)
5,8 kg (12,8 lb)
6,9 kg (15,2 lb)
6,2 kg (13,7 lb)
7,3 kg (16,1 lb)
6,6 kg (14,6 lb)
7,7 kg (17,0 lb)
SCHLAGZAHL MAX. / IMPACT RATE MAX.
1.960 /min
1.960 /min
1.960 /min
1.960 /min
1.960 /min
1.960 /min
1.960 /min
1.960 /min
BETRIEBSDRUCK / OPERATING PRESSURE
3,0 - 6,0 bar (44 - 87 psi)
3,0 - 6,0 bar (44 - 87 psi)
3,0 - 6,0 bar (44 - 87 psi)
3,0 - 6,0 bar (44 - 87 psi)
3,0 - 6,0 bar (44 - 87 psi)
3,0 - 6,0 bar (44 - 87 psi)
3,0 - 6,0 bar (44 - 87 psi)
3,0 - 6,0 bar (44 - 87 psi)
LUFTVERBRAUCH / AIR CONSUMPTION
255 l/min (9,0 cfm) / 6.0 bar (87 psi)
255 l/min (9,0 cfm) / 6.0 bar (87 psi)
255 l/min (9,0 cfm) / 6.0 bar (87 psi)
255 l/min (9,0 cfm) / 6.0 bar (87 psi)
255 l/min (9,0 cfm) / 6.0 bar (87 psi)
255 l/min (9,0 cfm) / 6.0 bar (87 psi)
255 l/min (9,0 cfm) / 6.0 bar (87 psi)
255 l/min (9,0 cfm) / 6.0 bar (87 psi)
Page 1 of 2

OPERATING MANUAL

VH / VTS / VBL / VAI

VOGT Hammer with angled hammer mechanism

VOGT devices with a 25 ° angled hammer mechanism are a special solution for special applications. They are used e.g. for tamping and compaction work of pipes.
With pleasure we advise you on your specific application.

rohr_unterstopfen.jpg

Downloads